Home > Products > Paints & Coatings > VHT >

VHT Flameproof Ceramic Coating Flat Yellow 11 oz Spray

VHT Flameproof Ceramic Coating

Our Price: $8.99

Availability:: In Stock


VHT FlameProof™ Coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems and the aerospace industry for jet engines, re-entry vehicles and other high temperature applications. VHT FlameProof™ Coating will withstand temperatures up to 2000°F (1093°C) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed.

Temperature: 1300°F-2000°F (704°C-1093°C)

Applications: Headers, Exhaust Manifolds, Piston Domes, Inside Heads

Finish: Flat

Dry Time: Curing time required and can be done on or off vehicle (see below)

Curing FlameProof™

VHT FlameProof™ Coating only attains its unique properties after correct curing (refer to instructions on the can).

On the Vehicle
  • Paint must be completely dry before curing
  • Run at idle for 10 minutes
  • Cool for 20 minutes
  • Run at idle for 20 minutes
  • Cool for 20 minutes
  • Run under normal operating conditions for 30 minutes
Off the Vehicle
  • Paint must be completely dry before curing
  • Heat to 250°F (121°C) for 30 minutes
  • Cool for 30 minutes
  • Heat to 400°F (204°C) for 30 minutes
  • Cool for 30 minutes
  • Heat to 650°F (343°C ) for 30 minutes
  • Caution: Do not exceed the temperature of the least heat tolerant component or the base metal
Coating System

VHT provides a multi-high performance coating system for the ultimate in protection and quality. The system includes surface preparation, primer, paint and clear coat. Sold Separately

Prep SP445 Prep Spray
Finish SP115 FlameProof™ Clear

Share your knowledge of this product with other customers... Be the first to write a review