You are here:Home > Install Help > Vinyl Removal

Removal Instructions

All of our vinyl is designed so it can be removed without damaging the surface. Removing vinyl will not damage your cars paint or lights.

• For optimum results, surface temperature should be above 50 degrees F. and below 90 degrees F. If necessary move vehicle to a location where the temperature can be within the removal guide lines.

• Make sure to clean the vinyl surface before removal.

• Peel off vinyl with your finger nails. Do this until you remove all pieces of the vinyl.

• Wipe off the surface and you are done.      

• For left over residue or adhesive, we recommend using Rapid Remover without damage or mess.